poolife® MPT Extra 3

poolife<sup>®</sup> MPT Extra<sup>™</sup> 3

These unique poolife® MPT Extra 3″ Chlorinating Tablets were developed using all-in-one technology to sanitize, prevent algae, staining and scaling and clarify and soften pool water. These proprietary tablets are sun protected for extended chlorine life and can be used in floaters, feeders or skimmers.

Sizes

  • Individual Tablets
  • 2.6 lbs.
  • 4 lbs.
  • 11 lbs.
  • 21 lbs.
  • 35 lbs.

How to Use for Start Up

Balance pool water, shock treat with a Poolife shock product following label directions. Stabilize your pool water using Poolife Stabilizer and Conditioner. Then add 1 tablet per 10,000 of pool water to a skimmer or floater every week or as needed to maintain a 1-4 ppm free available chlorine reading. The pool should not be entered until the chlorine residual is 1-4 ppm as measured with a test kit.

How to Use for Maintenance Dose

Add 1 tablet per 10,000 of pool water to a skimmer or floater every week or as needed to maintain a 1-4 ppm free available chlorine reading.  Do not add other chemicals to teh skimmer or floater while this product is present. Maintain a chlorine residual of 1-4 ppm as measured with a test kit. If level goes above 4 ppm reduce skimmer flow rate or daily pump run time.  The number of tabs will vary with bather load, water temperature, rain, and pump operating time. run filter for a minimum of 8 hours per day.

Compatible With

Can be used with all chlorine based systems. Directly Compatible only with other Trichloro-s-Triazine Trione based products

Advantages

Sanitizes and prevents algae, prevents staining and scale formation, Clarifies and softens water

Useful Tips

poolife® MPT Extra™ 3″ Chlorinating Tablets are exclusive to professional poolife® Dealers. Follow all 3 steps of the poolife® MPE Extra™ System. When using poolife® MPT Extra™ 3″ Chlorinating Tablets, shock treat at least once a week with poolife® TurboShock® shock treatment. Prevent green, black and yellow algae with poolife® Defend+® algaecide.
Use your poolife® Test Strips to test the chlorine and pH levels at least twice a week.