Use poolife® Flocculant to troubleshoot a cloudy pool or for sever algae blooms. Make sure your water is always properly balanced and your filter is running effectively.
How to Use for Start Up
Backwash and rinse your filter and then add water to the pool to fill it to the top of the skimmer basket. Then add 1.5 lb of Poolife flocculant to a bucket of water to dissolve. Broadcast this solution throughout the pool run the pump on recirculate setting for 30 minutes then turn it off. Do not use the pool for 24-48 hours while the floc settles. once the floc has settled to the bottom adjust valve to the waste setting and manually vacuum to waste removing the floc from the pool bottom. Resume normal filtration. See label for alternate uses and directions.
How to Use for Maintenance Dose
Backwash and rinse your filter and then add water to the pool to fill it to the top of the skimmer basket. Then add 1.5 lb of Poolife flocculant to a bucket of water to dissolve. Broadcast this solution throughout the pool run the pump on recirculate setting for 30 minutes then turn it off. Do not use the pool for 24-48 hours while the floc settles. once the floc has settled to the bottom adjust valve to the waste setting and manually vacuum to waste removing the floc from the pool bottom. Resume normal filtration. See label for alternate uses and directions.