Stabilized Chlorinators (orange lids)
poolife® stabilized chlorinators (orange lids) help keep the pool water sparkling clean with 3” tablets, 1” tablets and sticks for use in automatic chlorinators, skimmers, feeders and floaters. These trichlor-based products dissolve slowly for continuous chlorination. The granular stabilized products keep your pool clean and dissolve instantly for quick results. Stabilized chlorinators are sun protected to extend the life of the chlorine in your pool water. The poolife®MPT Extra™ 3″ Chlorinating Tablets sanitize, prevent algae, clarify and soften pool water – all in one!
Chlorinators (yellow lids)
Our exclusive line of chlorinators (yellow lids) help you ensure that its beauty is easily maintained. poolife®chlorinators are calcium hypochlorite based and designed to effectively guard against bacteria, algae and other contaminants. poolife® chlorinators are available in caplet and granular forms. The granular chlorinator products dissolve quickly, chlorinate with fast results and will NOT cause overstabilization – even with prolonged use. There is no need to pre-dissolve poolife® granular chlorinators before use. The caplets have been designed for use in skimmers and dissolve slowly for continuous chlorination. Always read product label directions before use.
poolife® 3″ Cleaning Tablets Stabilized Chlorinator
poolife® 3″ Cleaning Tablets Stabilized Chlorinator are similar to poolife® 1″ Cleaning Tablets Stabilized Chlorinator, only different in size. The tablets are slow dissolving and long lasting and kill bacteria, control algae and protect your pool’s chlorine from sunlight degradation.
How to Use for Start Up
Balance pool water, shock treat with a Poolife shock product following label directions. Stabilize your pool water using Poolife Stabilizer and Conditioner. Then add 1- 6 oz tablet per 10,000 of pool water to a feeder or skimmer every week or as needed to maintain a 1-4 ppm free available chlorine reading.
How to Use for Maintenance Dose
Add 1- 6 oz tablet per 10,000 of pool water to a feeder or skimmer every week or as needed to maintain a 1-4 ppm free available chlorine reading. Dosage may vary depending on bather load, water temperature and other conditions. The pool should not be entered until the chlorine residual is 1-4 ppm as measured with a test kit. As a preventative treatment you should shock treat weekly to burn out organic material and keep water sparkling clear.
Compatible only with other Trichloro-s-Triazine Trione based products
Convenient for use in skimmers or feeders
When using poolife® Cleaning Tablets Stabilized Chlorinator, shock treat at least once a week using poolife® TurboShock® shock treatment or poolife® Rapid Shock® shock treatment. For best results add tablets to a new, clean skimmer, floater or automatic feeder. Always read feeder instructions before use. Use your poolife® 6-Way Test Strips to test the chlorine and pH levels at least twice a week.